shopping

Westcott Designs Front Tire Clearance Kit for the 2023-2025 Sequoia. Enables you to run up to a 37" tire with full turning radius and clearance. Includes CNC laser cut weld in frame plates, inner Fenderwell pull back brackets and associated hardware to complete the job. Made in the U.S.A. and comes with a Lifetime Warranty.

• Run up to a 37" tall tire
• Easy installation and includes hardware
• Made in the U.S.A.
• Lifetime Warranty

CURRENT LEAD TIMES: 6-8 WEEKS ---Westcott Designs TRD preload collar lift kit for the 2022-2025 Toyota Tundra! This conversion kit will fit ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum & TRD Off-Road). This kit is designed to be used with the optional TRD shocks (#PTR13-34330) and struts (#PTR13-34310) that are available directly from Toyota. There is no need to spend thousands of dollars on this kit from your dealer when you can purchase it here for a fraction of the cost. We offer this kit in (2) different configurations, you can purchase it as a complete kit with shocks or you can purchase just our preload collar kit and source the shocks on your own from your local dealer. This kit features CNC machined lower preload collars, top shim plates, rear billet lift pucks and a brake like relocation bracket. These kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. These kits give you a true 3" of front lift and 1.5" of rear lift and ride better than factory! All kits comes with complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory if not better ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset and our Westcott Designs Tundra Tire Clearance Kit) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Please note, you will need the Toyota TRD red axles in order to make this kit work, those part numbers are 43420-0C020 (Left) and 43410-0C020 (Right) which are available from your local Toyota dealer. *Patent Pending This kit provides the following lift:

• 2022-'24 Tundra TRD suspension equipped trucks: 3.0” (front lift) and 1.50” (rear lift)
• This kit fits ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum, & TRD Off-Road)
• Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits

Westcott Designs 2005-2023 Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2005-2023 Tacoma TRD Off-Road with the yellow body Bilstein TRD shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2005-2023 Tacoma TRD Off-Road: 3? (front lift) and 1.00? (rear lift)

CURRENT LEAD TIMES: 4-5 Weeks

2024-2025 Toyota Land Cruiser Full Length Modular Roof Rack by Westcott Designs

Westcott Designs full length modular roof rack for the all-new 2024-2025 Toyota Land Cruiser . This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• Low Profile Visor
• Signature bottle openers
• Accepting Pre-Orders.  Be the first in line! 

*IMPORTANT: NOT APPLICABLE ON AEV MODEL --- Westcott Designs Front Fender Liner Pullback Kit for 2020-2026 GM 1500 trucks. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware.? Made in the U.S.A. and comes with a Lifetime Warranty.

• Run up to a 35" tall tire
• Easy installation and includes hardware
• Made in the U.S.A.
• Lifetime Warranty

This is for a Factory Fox TRD PRO, exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34? tire (295/70R18) without a body chop. This kit provides the following lifts:

• 2020-2022 Toyota Sequoia: 1.5? (front lift) and 1? (rear lift)

Westcott Designs Front Fender Liner Pullback Kit for 2021-2024 GMC Yukon & Yukon XL and Chevy Tahoe & Suburban SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware.  Made in the U.S.A. and comes with a Lifetime Warranty.

• Run up to a 35" tall tire
• Easy installation and includes hardware
• Made in the U.S.A.
• Lifetime Warranty

2008-2021 Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser. The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA?s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: ? 2008-2021 LC200: 3.0? (front lift) and 1.25? (rear lift)

Full Length Modular Roof Rack

Westcott Designs full length modular roof rack for the Lexus GX 460. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors? offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

• (6) light 6? cut out
• (10) light 4? cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Signature bottle openers
• Currently 4-6 week production lead time