shopping

Westcott Designs 2010-2024 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3? (front lift)

2024-2025 Toyota Tacoma Roof Rack by Westcott Designs

Westcott Designs roof rack for the 2024-2025 Tacoma! Features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels. Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.

• No cut out visor
• Single row 40-inch light bar cut out
• Rigid Adapt light bar cut out
• (10) light 4” cut out
• Signature bottle openers with or without the truck logo
• Currently 4 week production lead time

Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. ? Optional Heritage Edition Custom Color & Visor ($100 Additional) ? Optional floor inserts Standard Black ($455 Additional) ? Black or Bronze powder coat finish available ? Currently 4-6 week production lead time

Westcott Designs 2016-2023 Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2016-23' Tacoma TRD Off-Road: 3? (front lift)

Westcott Designs? Bed Stiffeners for 2016-2023 Toyota Tacoma (3rd Gen). Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol? USA! ?Powder coated black and include complete hardware for easy and clean installation.

Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2005-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2005-2023 Tacoma SR5/SR: 3? (front lift) and 1" (rear lift)

Westcott Designs rock sliders (With Kickout) for the 2022-'24 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** Options:

• Raw DOM, MIG Welded - $1470 a set.
• Raw DOM, TIG Welded - $1670 a set.
• Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
• Traditional black powder coat (BK59) for an additional $275.00 per set.
• Currently experiencing around an 7-8 week lead time on all new slider orders.

Westcott Designs rock sliders are some of the nicest and highest quality rock sliders on the market. Our rock sliders are some of the lightest on the market by nearly 5lbs. per side. We build everything in house in Phoenix, AZ by some of the best welders in the country to make sure our quality is nothing but the best! We laser cut all our tubing and plates, CNC bend all of our tubing and fixture weld everything to make sure tolerances are the same every time. *DOM (Drawn Over Mandrel) *HRPO (Hot Rolled Pickled and Oiled)

Westcott Designs Awning Brackets, designed to allow you to mount your awning to your Westcott Designs roof rack. The bracket mounting holes measure 2" center to center and fit all the popular standard awnings from companies such as: ARB, CVT, Ironman, Darche and more. All brackets are made out of mild steel, laser cut, hand welded and powder coated black for a strong, durable and long lasting finish. Sold in pairs and include complete hardware. Made In U.S.A. *They do not fit 180 or 270 degree awnings nor do they fit with our optional floor inserts.

Full Length Modular Roof Rack

Westcott Designs full length modular roof rack for the Lexus GX 470. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. We carefully design our racks to achieve just over 2mpg better than our competitors? offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• Low Profile
• Aluminum Construction
• Signature bottle openers
• Currently 4-6 week production lead time