shopping

Front Camera Relocation Bracket

Westcott Designs' front camera bracket allows you to transfer your factory OEM front camera from a standard Tundra or Sequoia grill to the OEM TRD PRO grill (Part# 53101-0C220).? Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! Bracket is made of 100% stainless steel and comes in a durable black powder coat finish. *T6 torx driver required, not included.

CURRENT LEAD TIMES: 6-8 WEEKS Check out the ALL NEW 2024 Lexus GX 550 Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset.

CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift)
• Tacoma (2017-2019): 1.5” (front lift)
• Tundra (2018-2021): 1.5” (front lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.

2008-2021 Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser. The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA?s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: ? 2008-2021 LC200: 3.0? (front lift) and 1.25? (rear lift)

Full Length Modular Roof Rack

Westcott Designs full length modular roof rack for the Lexus GX 460. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors? offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

• (6) light 6? cut out
• (10) light 4? cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Signature bottle openers
• Currently 4-6 week production lead time

CURRENT LEAD TIIMES: 4-5 Weeks

Westcott Designs full length modular roof rack for the 2024-2025 Lexus GX550. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• Low Profile Visor
• PRE-ORDER the 10-Light Visor TODAY! 
• Signature bottle openers

 

The FJ Cruiser spare tire relocation mount kit. It?s designed to allow the FJ to run up to a 35? spare tire and no have and clearance issues. It is built with high quality made parts all built in house. We take pride in making sure our products are to the highest quality. IMPORTANT: Minimum 106.1 MM Center Bore. **OPEN ENDED LUNG NUTS MAY BE REQUIRED**

*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:

• 2021-'24 4Runner: 2” (front lift only)
• Lead times for new orders vary from 2-3 weeks for black anodize finish kits

LEARN MORE HERE  https://www.youtube.com/watch?v=yJn91bQHE2c

Full Length Modular Roof Rack

Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5?. *Lights sold separately.

• (6) light 6? cut out
• (10) light 4? cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Currently 4-6 week production lead time