shopping

2024-2026 (4th Gen) Toyota Tacoma Trailhunter Preload Collar FRONT ONLY Lift Kit by Westcott Designs Westcott Designs preload collar FRONT ONLY lift kit for the all-new 2024-2025 Toyota Tacoma Trailhunter! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Trailhunter comes with 2" of front lift and 1.5" in the back on 33" Goodyear tires. Our Westcott kit gives your Trailhunter an additional 1.5” of lift in the front using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new Upper-Control Arms, and you can run up to a true 35" Tire (tested with a 35 x 12.5 x 18” tire with the factory Trailhunter wheels).

2025-2026 Toyota 4Runner (6th Gen) Full Length Lo-Pro Roof Rack by Westcott Designs

Westcott Designs full length lo-pro roof rack for the 2025-2026 Toyota 4Runner 6^th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include aluminum extruded cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately.

2025-2026 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset.

2024-2026 Toyota Tacoma 4WD Short Bed Rock Sliders by Westcott Designs

The Best Quality For Your New Truck!

Protect your 2024-2026 Tacoma Short Bed and elevate your off-road game with Westcott Designs premium rock sliders. Westcott Designs rock sliders for the 4the Gen Toyota Tacoma Short Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through.   *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

Westcott Designs Tundra 2007-2021 SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21? Tundra SR5 with black body shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-'21 Tundra SR5: 3? (front lift)

Westcott Designs Tundra SR5 preload collar lift kit. This kit is designed for the 2007-21? Tundra sR5 with the standard black body shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire*? It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-'21 Tundra SR5: 3? (front lift) and 1" (rear lift)

Westcott Designs rear lift pucks for 4th & 5th Generation Toyota 4Runner. Gives you 1.25" of rear lift only on standard rear coil suspension equipped 4Runner. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty.

Westcott Designs NO KICK OUT rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

2010-2024 Toyota 4Runner 5th Gen Full Length Lo-Pro Roof Rack by Westcott Designs

Westcott Designs full length lo-pro roof rack for the (2010-2024) 5^th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors? offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75? and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. *TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below.