shopping

Westcott Designs 2005-2023 Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2005-2023 Tacoma TRD Off-Road with the yellow body Bilstein TRD shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2005-2023 Tacoma TRD Off-Road: 3? (front lift) and 1.00? (rear lift)

Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35? tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250? mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500?. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.

• Compatible with both factory and most bolt-on accessory type bumpers
• Easy installation using existing OEM hardware
• Made in the U.S.A
• Lifetime Warranty

Full Length Roof Rack

Westcott Designs 2nd & 3rd Gen Tacoma roof rack. Features extruded aluminum cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5?.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

• (6) light 6? cut out
• (10) light 4? cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Signature bottle openers

Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. ? Optional Heritage Edition Custom Color & Visor ($100 Additional) ? Optional floor inserts Standard Black ($455 Additional) ? Black or Bronze powder coat finish available ? Currently 4-6 week production lead time

Westcott Designs 2016-2023 Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2016-23' Tacoma TRD Off-Road: 3? (front lift)

Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2005-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2005-2023 Tacoma SR5/SR: 3? (front lift) and 1" (rear lift)

Full Length Modular Roof Rack

Westcott Designs full length modular roof rack for the Lexus GX 470. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. We carefully design our racks to achieve just over 2mpg better than our competitors? offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• Low Profile
• Aluminum Construction
• Signature bottle openers
• Currently 4-6 week production lead time

Westcott Designs 2007-2021 Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After installing your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra TRD Off-Road: 3? (front lift) and 1" (rear lift)

Full Length Lo-Pro Roof Rack

Westcott Designs full length lo-pro roof rack for the popular 2003-2009 4^th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately.

• No cut out visor (plain)
• Single row 40" (Standard) light bar cut out
• Single row 42" (Rigid Adapt or similar) light bar cut out
• Single row 44" (Cali-Raised or similar) light bar cut out
• (10) light 4” cut out (Baja Designs Squadron, Rigid 360 Series or similar)
• (6) light 6” cut out (Baja Designs LP6, Rigid 6" or similar)
• Signature bottle openers
• Currently 4-6 week production lead time