shopping

Westcott Designs NO KICK OUT rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2023 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33? tire without a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not affect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:

• 2020-'23 Tacoma: 1.5? (front lift)

This is for a Factory Fox TRD PRO, exclusively for the 2020-2023 Toyota Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33? tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:

• 2020-2023 Toyota Tacoma: 1.5? (front lift) and 1? (rear lift)

Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024-2025 Toyota Tacoma (4th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.

2024-2025 Toyota Tacoma Trailhunter Preload Collar Lift Kit by Westcott Designs Westcott Designs preload collar lift kit for the all-new 2024-2025 Toyota Tacoma Trailhunter! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Trailhunter comes with 2" of front lift and 1.5" in the back on 33" Goodyear tires. Our Westcott kit gives your Trailhunter an additional 1.5” of lift in the front and .75" in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new Upper-Control Arms, and you can run up to a true 35" Tire (tested with a 35 x 12.5 x 18” tire with the factory Trailhunter wheels).

CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift)
• Tacoma (2017-2019): 1.5” (front lift)
• Tundra (2018-2021): 1.5” (front lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars.

Westcott Designs Bed Rack for the 4th Generation Toyota Tacoma. Compatible with both short and long beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible.  You'll also have your choice of the new Cab Height, where you can purchase the Roof Rack Extension to create a seamless roof rack from the Tacoma Roof Rack to the Bed Rack.   Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in short bed and long bed configurations.  All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately*

• Molle Panels (Short Bed or Long Bed)
• Roof Rack Extension - which pairs with the 4th Gen Tacoma Roof Rack for a seamless rack from the roof to the end of the bed.  Maximizing your space for long GFC tents and other accessories.

2016-2023 Toyota Tacoma (3rd Gen) Switch Pros Module Engine Bay Mount

The Westcott Designs Switch Pros Engine Bay Module Mount offers a sleek and efficient solution for mounting your Switch Pros module securely inside the engine bay of your 3rd Gen Toyota Tacoma (Model Years 2016-2023).  Designed with precision and durability in mind, this custom-fit bracket simplifies installation, saving you time and effort while keeping your module organized and protected. Constructed from high-quality materials, this mount ensures a clean, factory-like appearance and provides easy access for wiring and maintenance.  Its tailored design allows it to integrate seamlessly into the engine bay, offering a secure attachment point without compromising the vehicle's aesthetics or performance. Upgrade your Tacoma with this practical and stylish mounting solution, perfect for off-road enthusiasts and anyone looking to streamline their Switch Pros Installation.