shopping

This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34? tire (295/70R18) without a body chop. This kit provides the following lifts:

• 2020-2022 Toyota Sequoia: 1.5? (front lift)

PRE-ORDER the 2025 Toyota 4Runner (6th Gen) Full-Length Modular Roof Rack by Westcott Designs

Check-out Westcott Designs full length modular roof rack for the ALL-NEW 2025 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

Westcott Designs Tundra SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-'21 Tundra SR5: 3” (front lift)

2024-2025 Toyota Tacoma Trailhunter Preload Collar Lift Kit by Westcott Designs Westcott Designs preload collar lift kit for the all-new 2024-2025 Toyota Tacoma Trailhunter! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Trailhunter comes with 2" of front lift and 1.5" in the back on 33" Goodyear tires. Our Westcott kit gives your Trailhunter an additional 1.5” of lift in the front and .75" in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new Upper-Control Arms, and you can run up to a true 35" Tire (tested with a 35 x 12.5 x 18” tire with the factory Trailhunter wheels).

Check-out the 2010-2024 4Runner (5th Gen) Limited with XREAS Preload Collar Lift Kit (FRONT ONLY) Westcott Designs 4Runner Limited with XREAS Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-2024 4Runner Limited : 3” (front lift)
• Lead times for new orders vary from 2-3 weeks for black anodize finish kits

Westcott Designs? Bed Rack the 2022-2026 Toyota Tundra. Compatible with both 5.5? and 6.6? length beds and features a low profile with just 12? tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths to accommodate all configurations of accessories and bed lengths. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately

2010-2024 Toyota 4Runner (5th Gen) Westcott Designs RotopaX™ Ladder Bracket

Enhance the functionality of your 5th Generation Toyota 4Runner with the Westcott Designs RotopaX™ Bracket, engineered exclusively for use with the Westcott Designs rear hatch ladder for the 5th Gen 4Runner.  This sturdy and reliable bracket allows you to securely mount your RotopaX™ Fuel or storage packs, making it an essential addition for overland enthusiasts and adventurers alike.

Westcott Designs roof rack floor inserts for 200 Series Land Cruiser basket style roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs basket roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA

Full Length Lo-Pro Roof Rack for the 2019-2025 Toyota RAV4

Westcott Designs full length lo-pro roof rack for the 2019-2025 5^th generation Toyota RAV4. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately.