shopping

CURRENT LEAD TIMES: 4-5 Weeks

2024-2025 Toyota Land Cruiser Full Length Modular Roof Rack by Westcott Designs

Westcott Designs full length modular roof rack for the all-new 2024-2025 Toyota Land Cruiser . This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• Low Profile Visor
• Signature bottle openers
• Accepting Pre-Orders.  Be the first in line! 

*IMPORTANT: NOT APPLICABLE ON AEV MODEL --- Westcott Designs Front Fender Liner Pullback Kit for 2020-2026 GM 1500 trucks. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware.? Made in the U.S.A. and comes with a Lifetime Warranty.

• Run up to a 35" tall tire
• Easy installation and includes hardware
• Made in the U.S.A.
• Lifetime Warranty

This is for a Factory Fox TRD PRO, exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34? tire (295/70R18) without a body chop. This kit provides the following lifts:

• 2020-2022 Toyota Sequoia: 1.5? (front lift) and 1? (rear lift)

Westcott Designs Front Fender Liner Pullback Kit for 2021-2024 GMC Yukon & Yukon XL and Chevy Tahoe & Suburban SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware.  Made in the U.S.A. and comes with a Lifetime Warranty.

• Run up to a 35" tall tire
• Easy installation and includes hardware
• Made in the U.S.A.
• Lifetime Warranty

Westcott Designs Front Leveling preload collar lift kit for the all-new 2023-'24 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look.  Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 35" tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! https://www.youtube.com/watch?v=r3qOlRBxZDg

Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the all-new 2023-'24 Toyota Sequoia. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (49.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 4.5” T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• Optional floor inserts available
• Signature bottle openers
• Made in the U.S.A.
• All aluminum construction
• Choice of visor
• Lo-Pro model also available, see separate listing
• Currently 4-6 week production lead time

*If your Sequoia is equipped with a standard sunroof, either model roof rack is compatible. If your Sequoia is equipped with the optional panoramic sunroof, it will only function with the Modular model roof rack with the cross bars set in the tall position. You may damage your panoramic sunroof if you try to configure differently.

Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35? tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250? mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500?. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.

• Compatible with both factory and most bolt-on accessory type bumpers
• Easy installation using existing OEM hardware
• Made in the U.S.A
• Lifetime Warranty

Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-2026 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5? front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA?s, and you can run up to a 35? tire without a Body Mount Chop (37? tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:

• 2022-2025 Tundra Fox PRO suspension equipped trucks: 2.5? (front lift)

https://www.youtube.com/watch?v=NmHQbi1QlhM

Westcott Designs 2016-2023 Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3? of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1? in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33? tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2016-2023 Tacoma TRD Sport: 3? (front lift) and 1" (rear lift)