shopping

Westcott Designs Jerry Can Mount. Offered in either aluminum or steel construction and your choice of raw finish or powder coated black. These mounts are designed to be used with Wavian brand 20L Jerry Cans; see link below for more information. Laser cut and bent in house, strongest mount on the market and the best part is they are designed and built in the USA! Wavian website: https://wavianusa.com

This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33? tire with out a body chop. This kit provides the following lifts:

• 4Runner (2015 - 2018): 1.5? (front lift) and 1.25? (rear lift)
• Tacoma (2015 - 2016): 1.5? (front lift) and 1? (rear lift)
• Tundra (2015 - 2017): 1.5? (front lift) and 1? (rear lift)

This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2023 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33? tire without a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not affect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:

• 2020-'23 Tacoma: 1.5? (front lift)

Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33? tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:

• 4Runner (2015 - 2018): 1.5? (front lift) and 1.25? (rear lift)
• Tacoma (2015 - 2016): 1.5? (front lift) and 1? (rear lift)
• Tundra (2015 - 2017): 1.5? (front lift) and 1? (rear lift)

This is for a Factory Fox TRD PRO, exclusively for the 2020-2023 Toyota Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33? tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:

• 2020-2023 Toyota Tacoma: 1.5? (front lift) and 1? (rear lift)

Westcott Designs Key Chain

• Brushed Stainless

Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not affect your suspension travel. After installing your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed, and you can run up to a 33? tire without a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5? (front lift) 1.25" (rear lift)
• Tacoma (2017-2019): 1.5? (front lift) 1.0" (rear lift)
• Tundra (2018-2021): 1.5? (front lift) 1.0" (rear lift)

We are a full fab shop and a full production shop.? Please give use a call on your small or large projects.? You won't be disappointed you did.

Note: all tabs and plates are all laser cut to give our customer the highest quality and most precise of parts as possible. We are a full fab shop and a full production shop.? Please give use a call on your small or large projects.? You won't be disappointed you did. In house 3K fiber table laser. In house 3K fiber tube laser. In house Robotic welder We have some of the top fabricators and welders in the country.